ABS/Brake Light problem

12huserr

Cummins TSS
Joined
Jan 19, 2012
Messages
25
I need help figuring out why my ABS and my parking brake lights are on. I popped a brake line last year in september. The one behind the fuel tank. Typical place I have heard for them to break. I fixed it awhile back but can't figure out how to reset the lights. My speedo and odo still work just fine. Anyone ever have this problem before?
 
Comes on when there is excess air in the lines or your master cylinder is going bad.
 
Your e-brake light will also stay on, if your ABS sensor on top of the rear axle (pumpkin) fails.
 
Gotcha. I have had some guys tell me they think its apart of the pcm. Didnt know if I could clear it and it would turn back off. I will check my abs sensor then and see if that works. Someone else also told me there might be a reset button on the booster or maybe on the junction where the lines split on the frame.
 
Back
Top