Adjustable pump gear?

[Leyerly1]

Installing an adjustable Pump gear on a 97', was wondering if anybody knew a torque spec on the Allen head bolts once timing has been set. I got the gear from PDP if that helps. Thanks.

 

[zstroken]

Good and tight!

 

[Leyerly1]

Works for me thanks.

 

[zstroken]

I mean if your using an allen wrench with out an extension, you should be able to get it tight and not break it off.

 

[Leyerly1]

I thought i had read somewhere about 60ft/lbs but it could have easily been for something else. Good and tight sounds about right though.

 

[Tate]

What size bolts? The gear I got from Jesse uses 6 M10 socket head cap screws, I believe they are 10.9 grade, which would be 51 ft-lbs. Find out what bolts you use, then google the bolt torque for the appropriate size and grade.

That being said, I just go hand tight with my 3/8 ratchet.

 

[GOT-Torque]

40 ft-lbs is more than enough on my setup.

 

[Leyerly1]

40 ft-lbs is more than enough on my setup.

Mine is identical to the one in your avatar. Thanks for the input guys.