afc arm

[olddodgetruck]

i was wondering if anyone knew if afc arms were specific to each pump(160 180 215). the reason i ask is my Governor arm hits my plate perfect but seems about 1/16'' under the afc foot.

 

[NickTF]

I don't believe so but could be wrong. I suggest adjusting the pump gov. arm height by loosening or removing the adjustment stud which will raise the gov. arm height.

 

[olddodgetruck]

yea thats my next step. i might be wrong about the arm being to low because i took these measurements with the truck off just moving the throttle.

 

[NickTF]

If I remember correctly aftermarket GSKs especially 5Ks move the arm down a bit; some other food for thought. Get that adjustment screw loosened or removed and you should be good.