Air bags for pulling???

[dieseljunkie]

What do you guys think about Air bags as a suspension in the rear for a street truck as a puller? and where are you getting them?

 

[JacktheBear3]

In about 4 weeks stop over at the shop to see the latest in Air Bag Technology headed straight for the HOOK.

 

[dieseljunkie]

Awsome, call me and let me know how much money to bring.

 

[getblown5.9]

they are a good options when they are allowed. most of the street classes around here you cant have them and must disconnect the lines to them to prove they are empty. if the modified classes where blocks are allowed, then you will be fine.

 

[dieseljunkie]

they are a good options when they are allowed. most of the street classes around here you cant have them and must disconnect the lines to them to prove they are empty. if the modified classes where blocks are allowed, then you will be fine.

Nice video! Awsome music!! Hey what inj, turbo, and clutch u runnin with. Got any head work done. im tryin to get all set up for 08, also with gear u like for pullin? Nosey arnt I !

 

[getblown5.9]

DDP J62 injectors (240-250hp)
II HRVP44
II Silver Bullet 66
.093" crossover tubes
TST COMP
Smarty
head is o-ringed, studded with a marine gasket
clutch is SBC 3850 12cb

I pull in 4th gear low range unless its a really loose track. in my video there are two pulls in 2nd gear high range, one was really muddy with a red sled in the daylight put 28' on 2nd place, and the other was 3rd from the end, i slipped the clutch forever and didnt launch hard enough, got like 275' and 5th place.

 

[dieseljunkie]

Thats what ive pulled in 4th low. just the tubes not the lines 0.93(why)? Tight setup that about what im lookin for! Thanks.

 

[getblown5.9]

no need for the lines yet, but went to the tubes hoping to get a little more fuel to those big injectors and ended up picking up 8hp/25tq