Air Dog 150 Install

[Bad-Duvall]

does anyone know where to tie into the fuel system on a d-max I have an AD 150, Need to drop the tank? where do i plumb into the fuel filter housing? Air Dog did NOT include this in the instructions!!! PISSED :doh:

 

[tylerrustLB7]

Its the biggest fuel line along the frame rail its with 2 other small fuel lines. Cut it with a tube cutter and use the plastic fitting they offer. I took the bed off alot easyer imo. Plumb what into the fuel filter?

 

[Bad-Duvall]

Its the biggest fuel line along the frame rail its with 2 other small fuel lines. Cut it with a tube cutter and use the plastic fitting they offer. I took the bed off alot easyer imo. Plumb what into the fuel filter?

Thanks. ya after the air dog just run the line up to the supply side of the fuel filter housing? or what do you do after the air dog?

 

[1lowdiesel]

what is your email i'll send you the newest install sheet.

right above your carrier bearing x member is where you will tie into the fuel line. it's where the hard line connects to the flex line that goes to the tank. just plug the fuel line on the tank when you put the draw tube in. taking the bed off is easier, last one i did i dropped the tank though.