Air dog 150 with filters New, never used.

[Extreme Engines]

Open box item, set pressure is 30psi
Missing the following
(1) 1/2" fuel line
(1) 1/2" straight push lock fitting

everything else is complete and new.

$375 shipped

 

[nomercy]

what year is it for?

 

[DTanklage]

you could use it on anything that requires 30 psi of fuel

 

[Extreme Engines]

what year is it for?

05' and up. Thats what the box say at least.

 

[Extreme Engines]

you could use it on anything that requires 30 psi of fuel

The psi is adjustable with a spring i think. The Hot single cp3 guys could bennifit from higher pressure though.

 

[Jamie@VDP]

is that bottom dollar pm me if not.
thanks,jamie

 

[DTanklage]

The psi is adjustable with a spring i think.

The Hot single cp3 guys could bennifit from higher pressure

you can change the spring for more pressure...or plug the built in bypass and put a bypass regulator up by the motor....

where it is supposed to be : )

375 is cheap for a decent pump filter water sep and reg

 

[justindiiorio]

so would it fit an 01

 

[RAMROD]

You have mail

 

[03f250stroke]

you can change the spring for more pressure...or plug the built in bypass and put a bypass regulator up by the motor....

where it is supposed to be : )

375 is cheap for a decent pump filter water sep and reg

you have any more info about this?

 

[Highfinance97]

so would it fit an 01

If you got the PSI down to 15 or so....

 

[Extreme Engines]

$360 shipped. Great buy here!

 

[SmokinCummins]

so would it fit an 01

It will fit, but you will have to change the harness, or splice into the factory harness for the trigger wire. PSI change is easily done with a different spring. If this is an 05 unit, it should also have a draw straw included.

 

[06ramcummins]

where do i get this spring to adjust the pressure? no hijack intended felt like a good time to ask.

 

[95ram]

where do i get this spring to adjust the pressure? no hijack intended felt like a good time to ask.

From airdog. they have multiple springs. You just have to tell them what PSI you want to run.

 

[Extreme Engines]

Thats right! Airdog has all that stuff.

 

[tater_thrower76]

work on a 97? let me know?

 

[SmokinCummins]

Yes, it will go on a 97. You will have to do a little plumbing on the injector fuel return, but it is pretty simple.

 

[2Tone12V]

And get a different fitting at the injector pump. P pump needs the 14mm and everything else takes a 12mm.

 

[JohhnyFoxtrot]

AirdogII is the billet filter cap necesarry at that psi or is ti easier to just bypass the stock filter on the return line?