sredish
Where am I?
- Joined
- May 10, 2006
- Messages
- 884
Here's my list of parts ordered:
ExtremeAire Severe Duty Compressor
Tech Specs:
Then, two 4 gallon air tanks:
I'm going to be putting it where the spare tire goes, with everything mounted on the plate between the plate and the bed, so it's well protected. From talking to them, this should be more than enough air to easily change/pull wheels using an impact, seat beads and do virtually anything I want as far as air is concerned. Next step will be to get some horns to put up in the front bumper.
Just talked to Chris at 4by4connection.com and it'll be on the way tomorrow; should be an awesome setup.
ExtremeAire Severe Duty Compressor
Tech Specs:
- Continuous duty cycle compressor
- 3/4 horsepower fan cooled motor
- 30-amp draw at 35psi
- 40-amp draw at 150psi
- 4 cfm flow rate
- 150 psi max working pressure
Then, two 4 gallon air tanks:
I'm going to be putting it where the spare tire goes, with everything mounted on the plate between the plate and the bed, so it's well protected. From talking to them, this should be more than enough air to easily change/pull wheels using an impact, seat beads and do virtually anything I want as far as air is concerned. Next step will be to get some horns to put up in the front bumper.
Just talked to Chris at 4by4connection.com and it'll be on the way tomorrow; should be an awesome setup.