Airdog 150 and in tank setup?

R

RV2

New member
Joined
Feb 19, 2009
Messages
20
I'm thinking of purchasing the airdog 150 but I have an in tank setup in my 02, will I run into any problems with this installation? will I need extra parts?
 
All you need to do is disconect the in tank pump and install a new suction tube for the air dog.
 
The AirDog II DF-165 kit comes with all the parts you need to eliminate the in tank pump.
 
The 150 kit will give you the parts you need to bypass the intank pump. The wiring may be a little different depending on what they did with the stock harness, but you will be able to make it work.
 
I put one on my 02 and didn't need anything extra that wasn't sent with the pump.
 
Ok I got my Airdog and will start installation tomorrow, where is the best place to install the draw straw on my 02 dually?
 
Well i got the Airdog 150 installed tonight, it was pretty easy except pulling the bed off by myself.
Now I have to see were I can plumb a fuel pressure gauge.
 
You must log in or register to reply here.
Back
Top