Airdog 150 questions??

D

dspoon

New member
Joined
Jun 11, 2008
Messages
6
Well my sweet daughter gave me my birthday gift today a airdog 150 with draw straw. I have a few questions about the install here goes.
Do I leave the factory fuel canster and lift pump in place? if not what do I do with the water sensor and the fuel heater once they are unpluged will they throw a CEL code? And in the kit I would rather not use the draw straw they supply I like the VALCAN-I drawstraw with 2 returns and 1 supply that way I dont have to cut the fuel filler tube for the return. Are people just leaving everything in and bypassing it or are they ripping it out??
 
Water in fuel light will come up if it gets wet, but just tape it up and it's just fine.
 
You cna just leave everything on there, it won't hurt anything.

as for the fuel line kits the vulcan kit would be your best bet if you don't want to have to cut the filler tube. You can also look into the kit that PF sells that just modifies the stock pick up. Then you can use the draw tube as your return.
 
dspoon said:
Well my sweet daughter gave me my birthday gift today a airdog 150 with draw straw. I have a few questions about the install here goes.
Do I leave the factory fuel canster and lift pump in place? if not what do I do with the water sensor and the fuel heater once they are unpluged will they throw a CEL code? And in the kit I would rather not use the draw straw they supply I like the VALCAN-I drawstraw with 2 returns and 1 supply that way I dont have to cut the fuel filler tube for the return. Are people just leaving everything in and bypassing it or are they ripping it out??
Click to expand...

You have one cool daughter!! The AirDog sets her over the top!!! But you trained your kids very well. Got them buying you truck parts. :bow:
 
You must log in or register to reply here.
Back
Top