Amosil Bypass install

[nate]

Before I drill holes, what do you guys think about putting it here. It's between the front and rear doors more-or-less.

It's about the only place on the frame rail that gives me enough room to put a shield around the filter. Been searching on the web, haven't found many ideas.

I could go forward some but there is a cab floor "rail" so the filter would be hanging below the frame a bit... I don't like that too much.

I'm using hydraulic lines so they will be plenty tough. Only thing is they will be around 7ft long, so looking at ~ $30 a hose.

 

[Billysgoat]

If you be happy, I be happy, just be aware that the lines have been known to vibrate their arse off from the pulsing of the oil pump. When you tie them up just make sure they are not rubbing anything they are not securely mounted to.