another twin question

[Kick Start]

Will the stock oil feed line reach the top of the turbo after the manifold is flipped over?
Also, will the oil return line be long enough to still reach? Sorry if these are dumb questions, just trying to save money and do it right.

 

[triton]

Will the stock oil feed line reach the top of the turbo after the manifold is flipped over?
Also, will the oil return line be long enough to still reach? Sorry if these are dumb questions, just trying to save money and do it right.

this may depend on who kit is being using or how you design your own but, the bottom turbo uses the stock oil drain and Cummins sells a very long drain just like the stocker for the top turbo

 

[lee01dg]

Top turbo oil feed line will reach but will be stretched, the oil return I cut and spliced in piece of rubber hose to make it reach. I have source automotive piping.

 

[bbtank45]

i replaced the stock line with steel braided, for both steel braided lines i paid 40 bucks. IMO a wise investment after my twins caught fire, the steel braiding wasnt harmed while all rubber/plastic melted.

 

[Kick Start]

Thank you all for the help.

 

[sstockton]

i replaced the stock line with steel braided, for both steel braided lines i paid 40 bucks. IMO a wise investment after my twins caught fire, the steel braiding wasnt harmed while all rubber/plastic melted.

Where did you get your lines?
Sean

 

[Kick Start]

I'm gonna get mine from source. Hopefully they are open sat and I'm gonna put in my big order. Think I would of been better off just buying a kit.