Anybody Got an Opinion?

B

BigBadBrown

New member
Joined
Dec 9, 2007
Messages
62
Guys, i've got an 01 2500 4x4 6spd. I've got a S&b cold air intake, edge w/ att. smarty and a 4inch exhaust. i had stg 3 jammers but took them out because it would hard start when warm. when we took them out, there was a black plastic line that went into the passenger side into the dryer. it melted on the turbo. i tried the best i can so far to fix it. well, the next day i was pulling a trailer and a wierd noise started coming what seemed like out of the instrument panel. it's like a whurring buzz that goes from 3rd gear to 6th and gets louder with rpm, sounds like its coming from the dash somewhere. Anybody have any idea what that might be?


these are the codes i got off of it.
P1693
P0720
P1763
P0713
P0122
P0753
 
i think that black plastice line controls the a/c vents. when it melted the air quit blowing out of them. as soon as i fixed those everything was good that night. then the next day i'm pulling a loaded trailer...about 6 tons and this noise comes on. its weird becuase it only comes on in third through 6th gear. and the noise increases with rpm. it almost sounds like a turbo whine but it sounds electric. i've checked all the fuses and everything and now im getting those codes. i'm going to try and reset the apps tommorrow to see if that'll change anything. anybody know anything else about those other codes?
 
I know what the codes are...anybody have any idea on how to fix them? I've cleared them with the smarty, but they've came back.
 
You must log in or register to reply here.
Back
Top