BlackStroker
New member
- Joined
- Mar 28, 2007
- Messages
- 552
I got a 2004 drw dana 80 thats in great shape, disk brakes, pads are in great shape, it has traction bar mounts welded on it that could be cut off but would have to be. The spider side gears are welded to the carrier so its full time lock and it has been tested pretty hard with the cummins up front. Just bought a dodge dually so I may be swapping it in instead of the ford 80. If anyone is interested please call me! 309 275-4248 I would like to get about 1,000 bucks for it paid 1250 at the junk yard.
also I have welded the tubes to the center section so it won't turn up under extreme pulling conditions.
forgot to add that this is a 100% drop in replacement for any 250 or 350 srw truck it was pretty slick to change over about 1.5 hours total and done, the back wheels stick out about 3" on each side unless you have the tubes cut down, but for pulling it would be just fine the way it is.
also I have welded the tubes to the center section so it won't turn up under extreme pulling conditions.
forgot to add that this is a 100% drop in replacement for any 250 or 350 srw truck it was pretty slick to change over about 1.5 hours total and done, the back wheels stick out about 3" on each side unless you have the tubes cut down, but for pulling it would be just fine the way it is.