ats 47re install 02 no overdrive help

R

rjnkns

New member
Joined
Sep 28, 2008
Messages
100
installed ats 47re race valvebody out of 96 into 02 no overdrive any sugestions
 
Dont you have to switch some of the cylinodes(sp). It's not a direct swap.
 
Did the 96 and 02 both have o/d before the swap? The governor pressure sensors are not suppose to interchange but I have done it and it did work. I probably wouldnt run 96 electronics on an 02 though. Any lights on or codes?
 
they both had OD and all other things work just fine just OD dont engage
 
Electronics are different. It is actually the governor pressure transducer that is different. You need a new harness for the VB also.
 
Yes, if you swap the harness and solenoids it should work just fine.
 
VBs ar ethe same like he said change the solenoids and the harness does it have lock up and no overdrive or no lock up or overdrive
 
Yup change the electronic harness and solinoids and possibly the Neutral safety switch maybe.
 
does anybody know what wires to wire the diode to the 02 are they the same wires on the ecm
 
You must log in or register to reply here.
Back
Top