Rattlin_Ram
New member
- Joined
- Aug 8, 2007
- Messages
- 475
Anyone know what the specs are on an ATS aurora 4000? I have one, but when ppl ask me what size it is I pretty much say.... um duh.... I dunno... lol :st:
Aurora 4000
- Thread starter Rattlin_Ram
- Start date
Limited
Slow N' Quiet
- Joined
- Apr 17, 2008
- Messages
- 2,193
Compressor Wheel-----Inches-----Millimeters
-----------Inducer-----2.48--------63.00
-----------Exducer-----3.63--------92.28
Exhaust Wheel-----Inches-----Millimeter
--------Inducer-----3.00-------76.43
--------Exducer-----2.76-------70.14
Compressor is a 63. That the univeral number most people go by, ie phatshaft 62,64,66 etc. Does it work well with your jammer 4's?
-----------Inducer-----2.48--------63.00
-----------Exducer-----3.63--------92.28
Exhaust Wheel-----Inches-----Millimeter
--------Inducer-----3.00-------76.43
--------Exducer-----2.76-------70.14
Compressor is a 63. That the univeral number most people go by, ie phatshaft 62,64,66 etc. Does it work well with your jammer 4's?
Last edited:
Crazytexan
New member
- Joined
- Jun 28, 2008
- Messages
- 162
Not to steal the thread but anyone know the specs on an s480?
Rattlin_Ram
New member
- Joined
- Aug 8, 2007
- Messages
- 475
It works pretty good with the jammers, but I have nothing else to compare it to other than stock injectors and turbo. WAY more power than just the Drag Comp and stock sticks... lol
I run with the comp off 99% of the time now (used to drive on 3x5, or 2x5). Smokes a little bit if I hammer on it, and if you lug it in OD up hills it can get toasty even without the comp on. When I turn on the comp to 5x5, hammer on it from a dead stop, it clouds both lanes goes a bit till it hits 20psi, then the back tires break loose, it hooks up, then I'm gone... it will clear up on top but my pyro can reach 1700* pretty easy.... With a boosted 10psi launch in 4x4 it runs 8.9's in the 1/8th, at 80mph or so. With 33" tires and 3.55 gears. I can't boost any higher yet cuz I hit torque management. Plus I only have a billet input.....
I run with the comp off 99% of the time now (used to drive on 3x5, or 2x5). Smokes a little bit if I hammer on it, and if you lug it in OD up hills it can get toasty even without the comp on. When I turn on the comp to 5x5, hammer on it from a dead stop, it clouds both lanes goes a bit till it hits 20psi, then the back tires break loose, it hooks up, then I'm gone... it will clear up on top but my pyro can reach 1700* pretty easy.... With a boosted 10psi launch in 4x4 it runs 8.9's in the 1/8th, at 80mph or so. With 33" tires and 3.55 gears. I can't boost any higher yet cuz I hit torque management. Plus I only have a billet input.....