auto trans stuff for sale

ofelas

ofelas

New member
Joined
Oct 18, 2015
Messages
285
1/ TCS Canada 89% (300-400rpm below stock stall) non LU converter for sale - fits 727 & 46RH(518) - this is the outstanding blue converter drop shipped by DTT that some of you may recognize. US$ 700 shipped, no need of sending back core, save yourself $200 core charge or return shipping.

Buy Dodge Diesel Heavy Duty Converter Online | TCS Performance Products

2/ TCS Canada billet pan off parts - can all be installed without pulling transmission - band strut, band anchor, servo & accumulator - will work on 727/46RH(518)/47RH-RE/48RE - US$ 160 shipped

A518 A618 47RE 48RE | MOPAR Products | TCS Performance Products

3/ Cummins shot peened flexplate - fits 89-07 - part # 3975464 - US$ $235 shipped

https://puredieselpower.com/dodge-products/5.9l-cummins-stock-flex-plate-5015709ab.html

4/ Mag Hytec trans pan w/ all bolts & new gasket, will fit 36RH, 727 through 48RE - $160 shipped

#727-D [#727-D] - $260.00 : mag-hytec

All the above parts are about 10k miles old, perfect condition. Pick up the good running 4x4 518 core for an extra $300 + shipping. It has 20k old clutches/steels/front band and a 10k old valve body.

Pm with your cell # for pics if needed.
 
2/ billet pan off parts & 4/ Mag Hytec PENDING.
 
Last edited:
2/ billet pan off parts - SOLD

4/ Mag Hytec pan - SOLD

Thx Logan will box & ship tomorrow.
 
New & unused TCS billet band anchor & band strut, Sonnax billet servo, Suncoast billet accumulator - SOLD wow, 3 minutes later, you live on the internet? LOL thx Dan it will go out tomorrow.
 
Last edited:
SnapOn 3/4" torque wrench 100-600 ft lbs - SOLD

SnapOn 1/2" torque wrench 20-100 ft lbs - SOLD

SnapOn 3/8" torque wrench 50-250 ft lbs - US$215 shipped

All torque instruments were calibrated every year, haven't used this particular set since the last calibration.

All have cases & calibration papers.
 
Last edited:
TCS converter SOLD

Good talking Sam, you should get automated tracking info when the box is picked up in an hour or two.
 
727 through 48 transmission pan, Mopar dual O-ringed reusable neoprene pan gasket, new Mopar Dacron filter, 12v 89-98 timing cover & a a couple valve covers for sale.

$150 all shipped in the same box.
 
Edit - the torque ranges for the 1/2” and 3/8” wrenches should be reversed - wrong copy and paste.
The 3/8” is still here.
Will take offers.
 
Buyer backed out of A518 4x4 trans due to time/shipping constraints.

Back up for sale, will toss in the shot peened flex-plate + a reusable Mopar dual O-ringed pan gasket for $475 total + shipping.
 
Two complete 12v billet freeze plug new sets (Keating Machine) 3x side, 1x front, 1x rear w/port - US$110 each set, shipped

Two new Keating Machine 12v billet tappet covers w/baffle boxes & ORB breather ports + aluminum 90 degree elbows - US$275 each, shipped.
 
Rebuilt A518, updated flexplate, new Mopar O-ringed pan gasket/Mopar dacron filter, & one last set of TCS billet band/strut/servo/accumulator/4.2 lever SOLD

Thx James, will install the small pieces, adjust bands/line pressure for your application & get on pallet with tracking to GA no later than tomorrow.
 
All Keating tappet covers & freeze plug sets SOLD

olddodgetruck thx for the PM a buddy saw this post & called me right after I posted.

I have a couple more, both new, if they're 12v one of them has got your name on it, if they're 24v they're also sold to the same feller above.
 
One last Keating Machine 12v billet tappet cover w/baffle boxes & 2x Mills Sterling Aerospace ORB male/viton o-rings to 90 degree AN elbows these are the same fittings I use on my tappet cover - SOLD pending funds

One new Keating Machine 24v billet tappet cover w/single baffle box no fittings - SOLD pending funds

One new Keating Machine 24v billet one piece valve cover - SOLD pending funds
 
Last edited:
You must log in or register to reply here.
Top