I'm getting ready for twins, installed studs, 70hp injectors, 1 was bad. After installed the studs i put injectors in , then rockers. ( didnt pull push rods ) I went to tighten the rocker bolt and # 4 intake was apx. .25 loose, its late so i took it off to make sure push rod was seated it is. then pull push rod and it is bent and rubbed the block. tried a different pusrod same deal, then noticed the valve side pivot is missing!
Any insite? Big stick cam, stock all the rest is stock.
Thanks Tim
Any insite? Big stick cam, stock all the rest is stock.
Thanks Tim