Billet Timing/Tappet - CR Parts

[lenahan05]

Timing covers (will fit with stock belt) picture attached. - $310
Tappet covers - $170

(812)229-1290

Late Model CR 04.5-07 Piston kit - $595
-comes with pistons, coated rings, pins, and clips.

CR Rebuild Kit (upper and lower end kit with all bearings and seals) - $695

 

[joefarmer]

I was all excited that you'd made a billet CR timing cover. :bang

 

[Cummins610]

X2 !

 

[lenahan05]

well if you think you need one i can have them made for you. id say your looking at $500 since very few people would buy them. not really a need for them other than the bling factor.

 

[joefarmer]

I want to drive the second CP3 off the front side of the cam gear. Kinda like how a waterman pump is driven on the big pulling trucks.

 

[Destination]

How much would shipping be to 61866 for the timing cover? And what size are the threads are in the access cover?

 

[dangerous06]

Are the pistons stock or .020 over Hoping for the latter!!

 

[lenahan05]

Are the pistons stock or .020 over Hoping for the latter!!

I can get you .020 over

 

[700 sportsman]

Do you have any front covers that will will work with a stock configuration and a VE pump?

 

[lenahan05]

Do you have any front covers that will will work with a stock configuration and a VE pump?

yeah. the one i have posted.

 

[WPDiesel]

CR rebuild with piston or without and is it 5.9/6.7 if it is with pistons?

 

[lenahan05]

CR rebuild with piston or without and is it 5.9/6.7 if it is with pistons?

5.9 no pistons.

 

[lenahan05]

CR rebuild with piston or without and is it 5.9/6.7 if it is with pistons?

I can get aftermarket full rebuild kit for the late style 04.5-07 with all gaskets, bearings, and piston kit for $1050 plus shipping if that would interest you.