Bolt and gasket...

SuperDave4x4

SuperDave4x4

popcorn playa
Joined
Apr 23, 2006
Messages
3,416
My hub went out and the idiots that did my last break job stripped 1 of the 4 bolts that holds the hub to the steering knuckle. With that being said I can not any where find a replacement bolt. Does anyone know where i can get one or have part number for it? Or am I left going to the dealership?

Also.

I have a oil leak coming from around the steering pump area, but on the bottom where a return line of some sort is. Does anyone know what I'm talking about?

Thanks for help..
 
Id ask Partsguy662 Dave. He has part numbers for miles.
 
SuperDave4x4 said:
My hub went out and the idiots that did my last break job stripped 1 of the 4 bolts that holds the hub to the steering knuckle. With that being said I can not any where find a replacement bolt. Does anyone know where i can get one or have part number for it? Or am I left going to the dealership?

Also.

I have a oil leak coming from around the steering pump area, but on the bottom where a return line of some sort is. Does anyone know what I'm talking about?

Thanks for help..
Click to expand...

if you can find the thread size you can buy the bolt from a fastener supply house.

and the leak is alsmot always the vacuum pump seal, the steering pump mounts to the vacuum pump. there is a kit available on ebay that comes with the seals, tools to change the seas, and a video that shows how to do it.
 
Timbeaux38 said:
Id ask Partsguy662 Dave. He has part numbers for miles.
Click to expand...

Thanks Tim, I didn't even think about him.


getblown5.9 said:
if you can find the thread size you can buy the bolt from a fastener supply house.

and the leak is alsmot always the vacuum pump seal, the steering pump mounts to the vacuum pump. there is a kit available on ebay that comes with the seals, tools to change the seas, and a video that shows how to do it.
Click to expand...

Yeah, that has to be it. It's driving me crazy dripping every where. I'll give ebay a look around.

Thanks for the help fellas.
 
dealer item I had 3 like that. Took a while to get a part number but the dealer had them. Not cheap
 
getblown5.9 said:
if you can find the thread size you can buy the bolt from a fastener supply house.

and the leak is alsmot always the vacuum pump seal, the steering pump mounts to the vacuum pump. there is a kit available on ebay that comes with the seals, tools to change the seas, and a video that shows how to do it.
Click to expand...

I do believe this is the kit your talkin about GetBlown. Looks pretty good to me. Thanks for the tip!!

DODGE RAM CUMMINS DIESEL VACUUM PUMP SEAL KIT : eBay Motors (item 220568458567 end time Mar-18-10 08:24:40 PDT)


EDIT: FYI....Genos Garage carries that same exact kit.
 
Last edited:
IIRC Cummins sells the same seal kit for under $10, it just doesn't come with a DVD and tools. I'm sure Snedge could tell you more about it. I think the PN is 4089742
 
White Knight said:
IIRC Cummins sells the same seal kit for under $10, it just doesn't come with a DVD and tools. I'm sure Snedge could tell you more about it. I think the PN is 4089742
Click to expand...

Right. no fancy tools or DVD, but it does come with instructions.
 
The cummins kit is so easy to put in, you may just have to read the instructions twice, I had too the first one i did. Never needed any special tools to install it
 
You must log in or register to reply here.
Back
Top