bucking and then clears out

junkymalibu81

New member
Joined
Dec 23, 2008
Messages
82
my friend has a 01 cummins 64/71 high tech turbo,fass fuel system,suncoast trans,gorend convertor,200hp injectors,blue chip fms box,ats manifold,4 inch downpipe/exhaust. I think thats about it. It wants to buck takes the motor up/down for about 60-80feet then it will clear up and take off any idea on what this might be?
 
It is called torque management.....
You need a BD RAD box or a smarty to over ride it.
 
What kind of fuel pressure are you guys running?

At idle i have 17psi and at wot it drops to 11 or 12 psi.
 
It is called torque management.....
You need a BD RAD box or a smarty to over ride it.

:bang Sorry guys I skipped over the " Once it shifts into second it takes off" part. Torque management is def the issue. Between the two listed above I would go with the RAD box. I tried the smarty and it didnt seem to completely get rid of the TM.
 
I had a friend run the smarty on his 01 and it didn't take the TM away completelly.
 
Back
Top