Selling a complete 12V motor.
I'm sure there are some small pieces I'm forgetting about but thats mostly it.
$25K OBO
Will load pictures in the future.
- Steel Sleeved and Filled Block that was torqued when filled with a torque plate and main girdle
- No Limit 3/4" Thick Main Girdle
- No Limit Billet Main Caps
- Polished Crank with H-Series Bearings used in the whole motor
- Haisley Billet Rods with ARP fasteners
- Scheids/Arias Forged and Coated 14:1 Pistons with Valve Relieves for custom cam
- No Limit Billet Cam spec'd for Hamilton Head and Pistons
- No Limit Adjustable Cam Gear
- Schied Billet Front Cover
- Haisley 14mm XXL Main Studs
- No Limit Custom 14mm Head Studs make for rocker setup.
- Hamilton head that has been ported to the max with shelf cut all by Wagler Comp. and big valves with Triple Rate Springs, Titanium keepers, guides, etc.
- No limit manufacturing billet roller rocker setup 1:7 ratio with billet valve cover
- Billet Push Rods
- CR Tappets
- Scheids International style 12v injectors 5x22 with billet hold downs
- Keating Billet side cover
- 12v fluidamper - competition
- Scheid 13MM P7100 Pump set at 650CC (capable of 900cc) (Auto Gov)
- DSR Fuel Pump with 3 way Dump Valve
- Steed Speed Competition T6 Manifold
I'm sure there are some small pieces I'm forgetting about but thats mostly it.
$25K OBO
Will load pictures in the future.