Hamilton Cams
ignorant
- Joined
- Jun 28, 2007
- Messages
- 2,639
Cams are here.
Just a reminder if you are using these cams on a 12valve, Please use 24v tappets. To take full advantage of the wide lobe, you must use a wider tappet. The 24v tappets are wider yet are much lighter than the cr tappets. This makes them ideal to be run at high rpm. Also make sure to order plenty of zddp for break-in.
Zach Hamilton
Just a reminder if you are using these cams on a 12valve, Please use 24v tappets. To take full advantage of the wide lobe, you must use a wider tappet. The 24v tappets are wider yet are much lighter than the cr tappets. This makes them ideal to be run at high rpm. Also make sure to order plenty of zddp for break-in.
Zach Hamilton