clean up and out

jakerc69

jakerc69

still broke
Joined
Mar 12, 2011
Messages
399
I have a s 400 with a t4 1.10 exh housing and bullseye race cover for sale $800 74ind 84exd

T4 PDI 3 piece for a 12 valve $350 (cracked divider)

Stock hp rating (brand new no box) brute power
1 piece flywheel conversion clutch kit for 07 6.7.
includes fly wheel, clutch, pressure plate, throwout bearing, pilot shaft bearing, and alignment tool. $450

nv4500 4x4 core trans with bad input and cluster gears (rest looks ok) $350
disassembled in box. no rear housing.

12 valve blocks x2 std bore. $400
24 valve 53 block ready to go std.honed and cleaned $300

2004, common rail gear set. Crank, Cam, Pump, Oil pump 103k miles $100

12 valve titanuim retainers and 10 degree locks. reduces installed height by
.030 new $225 (running same part numbers on my truck)

Lastly 2 sets of 12 valve (core injectors 180,160 hp) and 1 set of SO 24 valve injectors and tubes. $ 100 per set

looking for double disk clutch ceramic valair and big input shaft, or cash to buy them. will text pictures or post them later.
AS always prices are obo and shipping is to be negotiated. pm, call,or text 520 510 6020. jake
 
valve train

retainers are a reputable company in the industry that I would rather not disclose, took a bit of time to research the combo.
the locks are comp cams
10 degree locks and titanuim retainers,
I spin my truck to little over 4k and have 10 k miles on this combo with no issues. I will take this combo to over 5k when I build a race dedicated truck..
I use these in conjunction with Cummins performance parts valve springs it installs at a slightly lower height and bumps the seat pressure up to 165 and 300 + at opening with plenty of room for coil bind.
 
the posting is for the front gear set, not for the cam shaft. sorry for any confusion. I do have a couple of 12v 24 valve cam cores though if you are interested. do 100 plus shipping obo
 
bump new prices

I have a s 400 with a t4 1.10 exh housing and bullseye race cover for sale $800 74ind 84exd sold

T4 PDI 3 piece for a 12 valve $350 (cracked divider)

Stock hp rating (brand new no box) brute power
1 piece flywheel conversion clutch kit for 07 6.7.
includes fly wheel, clutch, pressure plate, throwout bearing, pilot shaft bearing, and alignment tool. $450

nv4500 4x4 core trans with bad input and cluster gears (rest looks ok) $350
disassembled in box. no rear housing.

12 valve blocks only one leftstd bore. $400
24 valve 53 block ready to go std.honed and cleaned $300

2004, common rail gear set. Crank, Cam, Pump, Oil pump 103k miles $100 shipped
12 valve titanuim retainers and 10 degree locks. reduces installed height by
.030 new $200 shipped(running same part numbers on my truck)

Lastly 2 sets of 12 valve (core injectors 180,160 hp) and 1 set of SO 24 valve injectors and tubes. $ 100 per set

looking for double disk clutch ceramic valair and big input shaft, or cash to buy them. will text pictures or post them later.
AS always prices are obo and shipping is to be negotiated. pm, call,or text 520 510 6020. jake
 
more stuff/ update

SDX 6x16 ppump pressure 24valve injectors, 750 OBO
bought used with 5k on them Dude went back to 12 valve

T4 PDI 3 piece for a 12 valve $350 (cracked divider)

Stock hp rating (brand new no box) brute power
1 piece flywheel conversion clutch kit for 07 6.7.
includes fly wheel, clutch, pressure plate, throwout bearing, pilot shaft bearing, and alignment tool. $450

nv4500 4x4 core trans with bad input and cluster gears (rest looks ok) $350
disassembled in box. no rear housing.

24 valve 53 block ready to go std.honed and cleaned $300

2004, common rail gear set. Crank, Cam, Pump, Oil pump 103k miles $100shipped

12 valve titanuim retainers and 10 degree locks. reduces installed height by
.030 new $200 shipped

Lastly 2 sets of 12 valve (core injectors 180,160 hp) and 1 set of SO 24 valve injectors and tubes. $ 100 per set

looking for double disk clutch ceramic valair and big input shaft, or cash to buy them. will text pictures or post them later.
AS always prices are obo and shipping is to be negotiated. pm, call,or text 520 510 6020. jake
 
Interested in the core trans do you have the bellhousing for it?
 
price cut up-date

SDX 6x16 ppump pressure 24valve injectors, 750 OBO650 shippedobo
bought used with 5k on them Dude went back to 12 valve

T4 PDI 3 piece for a 12 valve $350325 shipped (cracked divider)

Stock hp rating (brand new no box) brute power
1 piece flywheel conversion clutch kit for 07 6.7.
includes fly wheel, clutch, pressure plate, throwout bearing, pilot shaft bearing, and alignment tool. $450

nv4500 4x4 core trans with bad input and cluster gears (rest looks ok) $350
disassembled in box. no rear housing.

24 valve 53 block ready to go std.honed and cleaned $300
12 v block 1mm oversized new marine pistons crank std and rods unassembled $1000
2004, common rail gear set. Crank, Cam, Pump, Oil pump 103k miles $100shipped

12 valve titanuim retainers and 10 degree locks. reduces installed height by
.030 new $200 shippedsold

Lastly 2 sets of 12 valve (core injectors 180,160 hp) and 1 set of SO 24 valve injectors and tubes. $ 100 per set

Trades welcome performance 12 valve stuff, cams pumps turbos, injectors, conversion lines, rods pistons etc.
AS always prices are obo and shipping is to be negotiated. pm, call,or text 520 510 6020. jake
 
You must log in or register to reply here.
Top