clutch question

[powerstrokin]

I have a 2000 f250 with a 6 speed and lately my clutch has to be on the floor to get in gear and almost impossible to get in reverse. it has gotten worse and now when I take off from a start I can't get it in gear at all. is there a clutch ajustment or is the clutch gone? or is there a chance it could be the clutch cylinder?

 

[Valair1]

first thing to check is to see if the clutch master is tight in the firewall and or that it dont move when your pushing in on your clutch, i have seen fords with cracked firewalls, and if all that checks good it could be a cylinder and or a broken spring in the clutch. good luck

 

[powerstrokin]

it has alittle play in it, not much. think I may go get a new cylinder at the dealership tomorrow and hopefully that fixes it. hopefully I don't have to get into the clutch on it.

 

[powerstrokin]

thanks valair1 for pointing me in the right direction. I replaced the clutch master clyinder and its shifting good. had to wait on the part for a day but it wasn't hard to replace. thanks again

 

[Valair1]

your very welcome