code

[cm cows]

i was out claening the pickup and checked for codes and got 0230 which means transfer pump circuit out of range, but what does that mean. i changed the pump about a month ago and didnt clear or check for codes. so any insight is great thanx

 

[kalder]

IT could be still there from the old pump. the pcm knows what the resistance of the L/P and Harness should be, and if it goes out of the normal variance, it sets this code.

 

[haz-mat19]

Go have it cleared and you should be fine. What does your pressure read? I never got a code before my pump died:badidea:

 

[cnsmoke]

definately clear the code, it is there from the previous pump

 

[sstockton]

You replaced the stocker with a Holley correct?

Did you run your stock harness to a relay or directly to the holley pump itself? My guess would be that the holley is drawing more current than the stock circuit usually puts out and that that is what tripped the code. I could be wrong on that one, but I've always installed a relay, and have never seen that code.
Sean

 

[cm cows]

aint installed it yet to much tractor drivin to do