common rail block & parts & 12v parts

mainer

Member
Joined
Aug 26, 2006
Messages
78
everything must go. make offers, or its going for scrap.

some prices include shipping, that shipping is to the lower 48, others places will be more.

Wiring harness of 2003 commonrail. this is the engine harness, has all connectors except the alternator connector, this one was cut. perfect otherwise. $75 shipped.

wiringharness.jpg



set of 12v valve covers. $28 shipped

valvecovers12v.jpg


2003 commonrail valve cover. $35 shipped
plastic cover $25shipped. or $55 shipped for both
valvecover.jpg


starter off an 89 12v, worked great when pulled. $50 shipped
starter.jpg


oil pickup tubes. 2- 12v one common rail. $20 each plus shipping.

pickuptubes.jpg



intercooler tube and the 4" intake tube. $10 each plus shipping.
intaketubes.jpg


2003 common rail intake manifold. $25 shipped
intakemanifold.jpg



intake covers. 2- 12v one commonrail. one has the heater grid built into it. $20 shipped without heater grid. $45 shipped for the one with the grid (worked great when pulled)

intakecovers.jpg



12cm hotside with 40mm internal wastegate (would work perfect for twins) machined it myself, removed the divider in the housing part way down so it gates all 6 cylinders. needs an actuator $115 shipped. hx35 compressor housing, has been "rubbed" by the comp wheel but would still work fine. $25 shipped.

hx35.jpg



12v fuel heater. worked perfect when pulled. $25 shipped

fuelheater.jpg


2003 commonrail fuel filter housing. $35 shipped
fuelfilterhousing.jpg




flex plate ( cant remember if its off a 12v or common rail but i think they are the same).
$40 shipped.

flexplate.jpg



exhaust outlets, commonrail and 12v. $13 each + shipping
exhaustadapters.jpg



engine mounts. i know 2 are 24v, cant remember what the others are, i think common rail.

$45 a set shipped
enginemounts.jpg



2003 common rail short block. 34k miles. cylinder #4 is scored ( i think injector failed) all other cylinders are perfect. comes with crank, cam, pistons, rods. oil filter housing. (no oil pan) $350

block2.jpg


block1.jpg
 
I want the wiring harness please. How much would shipping be to 64029 on the 03 cr motor? Im assuming more then I care to spend but worth a shot.

PM me your info on how to do this please.816-277-8344
 
Last edited:
no 12v motors, got 2 coming though i think. one will probably be kept to be built for a puller this summer.
 
intake cover with heater grid is sold, plastic common rail valve cover is sold
 
I'd like the dipstick tube if you're willing to separate it. PM me with a price. Thanks!
 
Back
Top