complete Dana 80 dually axle

T

texsasdiesel

New member
Joined
Sep 23, 2008
Messages
524
plans have changed and I no longer need this axle. has 3 55 gears, an open carrier and is complete with all cables and lines. I had the axle all the way down to the housing and everything looked good to me, if I were to keep it I would replace the inner seals and bearings but that's bc I'm picky. has timken bearings in the hubs and kyoko bearings on the carrier. unsure of mileage as I bought it used. fluid came out nice and clean and axles are in great shape. could probably use shoes but drums are great. that's all I can think of, the axle is in Panama City FL and can be delivered as far north as ky in the next couple weeks. have any more questions or want pics, text me, 301-455-1918

asking 300

James

mods please delete previous ad
 
Last edited:
Hello James,

This, by some chance, wouldn't be a cab and chassis rear would it?

Thanks,

Arch
 
looks like approximately 72-73" was in the bed of the truck measuring by myself but i can get a more accurate measurement if an inch is really going to make that much of a different. i think the dana 60 fronts measure in at 70-71" so this should track pretty close to that if you're intending to run it in SRW form. don't know your end game for it tho
 
looks like approximately 72-73"
Click to expand...

You have a regular dually rear. The cab & chassis will measure about 69". I want to swap an 80 into my old 90 model. The regular dually works fine except she's really wide with 35's.

Thanks for measuring.
 
is your 90 a dually already? the dually 80 is actually about a 1/2inch less wide than the stock dually d70 in the 350s
 
You must log in or register to reply here.
Back
Top