complete Nv4500 swap setup (2wd)

SPLnut

SPLnut

Certified Smoke Blower
Joined
Aug 31, 2007
Messages
131
Almost new stock clutch, flywheel, bell housing, adapter plate, hydros, pedal assembly, trans cross member, and nv4500 2wd trans...Only needs 3 and 4th gear syncro's or can be driven like it is (double clutching works good)...everything needed will be included...$1000 plus freight...
 
SPLnut said:
Almost new stock clutch, flywheel, bell housing, adapter plate, hydros, pedal assembly, trans cross member, and nv4500 2wd trans...Only needs 3 and 4th gear syncro's or can be driven like it is (double clutching works good)...everything needed will be included...Asking $1100 plus freight...
Click to expand...

Dam, wish you were closer.
 
$850 plus paypal fees and freight its gotta go...pm me or call (225)252-9656
 
Last edited:
do u kno what would need to be done to the tranny to make it a 4x4 tranny ive heard u jus gotta change the mainshaft but idk...
 
if you have a transfer case from a 5spd then the mainshaft and tailhousing is all that you need but if you have a auto 4x4 then you would need the above plus the input for the transfer case would need to be changed...
 
i got a link to everything needed to convert it as the friend i was holding this for has an auto and had me locate the needed parts then backed out on me (knew not to hold my breath on this friend)
 
I'm likein this. Pm me with location. Let's work a deal
 
Location is listed under my avatar...not to far from you...Just East of Baton Rouge
 
$800 plus paypal fees and freight its gotta go...pm me or call (225)252-9656
 
Found something i'm wanting to buy so i'm dropping it to $750 plus paypal fees and freight its gotta go asap and wont get no lower...pm me or call (225)252-9656
 
Does the NV4500 bellhousing fit the same adapter plate as the getrag in a first gen? My buddy is looking to make this swap also and he is interested in this.
 
You must log in or register to reply here.
Back
Top