couple easy questions

[95ram]

Couple easy questions for someone.
First the injectors are leaking on my 12V. Is this common. Am I right in thinking I should just replace the copper washer.

Second, when I picked this thing up the guy said the tranny was out. Anywho I flushed the tranny, changed the filter, and filled it up. The trany works great, But, it wont shift into OD. Any thoughts about why it wont go into OD?

Third what size tube goes on the blow by on the side of the block. I believe its 3/4" but want to be sure before I go buy something.

 

[95ram]

What the heck you cant edit a post?

Anyway one other question. The throttle is very is to press when in P or N, but once in gear it becomes very hard to press. Is this normal?

 

[rubberfish]

If you pick up an injector install kit it
will have the copper washers and the
copper horseshoe things as well.

Can the overdrive be the same as
the earlier 1st gens? And require a
TPS adjustment and/or replacement?

And yes it is 3/4" tube. You can use
a piece of heater hose or whatever.

 

[Duster 5.9]

sounds like your tps is bad, or your smoke cable (throttle) is siezing up.