CR Head cut for Fire Rings

[SoDak24valve]

I have a 06 CR head that has been cut for 4.500x.105 fire rings and Has been ported and polished on the exhaust side and some on the intake side still has the factory shelf on the head, the valves are recessed for running a larger 181/210 cam, just pulled it off my running truck this last weekend. Comes with all rockers and stock valve springs. $1000 OBO Would consider trades turbo, injectors or aftermarket 2nd gen intercooler.

 

[zeigler86]

crack free??

 

[SoDak24valve]

As far as I know I can take a look at it later, I just had it at the machine shop this morning to have the valve springs swapped out said he didn't notice anything. I have ran this head on my truck for 3 years with no problems with the head. Also the grooves were cut radius groove not flat bottom.

 

[Newtodagame]

If intake was off I'd take it! I need to have my zz fab installed

 

[SoDak24valve]

I can remove it and have it milled on the cnc!

 

[SoDak24valve]

BUMP

 

[cummins0488]

Does your block have to be cut also or not?

 

[slowcommonrai]

Can you post some pics?

 

[SoDak24valve]

No the block does not need to be cut, PM your number and I will text them to you.

 

[cummins0488]

Would it defeat the purpose if the block isnt cut? What type of gasket has to be ran?

 

[SoDak24valve]

Not really, of course cutting both the head and block would be the best but just doing the head works as well. For the head I ran a head gasket and rings from haisley, it was a standard thickness 24v isb gasket cut for fire rings.

 

[SoDak24valve]

Bump will let go for $500 with out the rockers, but will still be loaded with valves and stock springs. Can cut and mill intake and drill and tap for zz fab intake for a little more. Need gone, buyer pays shipping.

 

[SoDak24valve]

Pm's answered and pending payment!

 

[Opinions Vary]

text me if its still available. 860-287-5598

 

[SoDak24valve]

Head has been sold received payment and tracking number sent to buy. Please remove.