cr parts for sell and pump parts

crhellboy

crhellboy

New member
Joined
May 29, 2009
Messages
131
cr parts for sell and pump parts

Fully built dodge 48re trans
new clutches
manual vb.... With outlaw gate shifter
billet input
output
intermediate
billet direct drum
billet servo and kickdown
carbon band
goerend 2200 stall converter
custom built 47re valve body high pressure valve body
Deep pan
Billet Flex Plate
Trans refresh this past winter has had 15 hooks sence then
4500.00

billet wheel 2.6 turbo with 1/8 protrution 475 wheel with race cover .90 ex with the big .96 ex wheel has 20 hooks on it 1500.00

03 complete head wih heavy duty springs and rocker studs has been port matched on exhusted side and valve seats redone so they wouldnt drop 850.00

2 industrail injection 85% pumps have paper work from industrail injection for buyer 700.00 each

complete injectors with stock and 80 lpm tips 1700.00 no cores needed

fass 150 150 with wiring harness and all the fitings will need new lines though 300.00

dr proformance pressure box 250.00

tst 49 box 200.00

7 by 18 24v pump complete injectors 500.00 no cores needed

12mm pump 5000rpm gov springs dlv valves rack set internal
750.00
 
So much cool stuff.

We'll see how my end of harvest bonus plays out.



Oh and your title should read:

cr parts for sail and pump parts

Don't want to upset the english teacher nazis here.
 
estrada5.9 said:
So much cool stuff.

We'll see how my end of harvest bonus plays out.



Oh and your title should read:

cr parts for sail and pump parts

Don't want to upset the english teacher nazis here.
Click to expand...



"Sail" ??




:hehe:
 
Pumps have about 200 street miles on them and about 40 hooks the truck hadn't seen the street in two years
 
Miles on injectors? Are they 03-04 or 04.5+? If 03-04 roughly how big (hp wise) would 80lpm be? Would u sell injector bodies minus the nozzles? Also milage

Sent from my SPH-M910 using Tapatalk
 
Ok I figured out how big 80lpm nozzles are. If they are for 03-04 I'm very very interested.

Sent from my SPH-M910 using Tapatalk
 
those 625s musta got lost in the mail sense its been two monthes and still havent received them
 
both cp3 pumps are sold
injectors sold
12 mm pump sold

sell pending on head and tst

so heres what is left

Fully built dodge 48re trans
new clutches
manual vb.... With outlaw gate shifter
billet input
output
intermediate
billet direct drum
billet servo and kickdown
carbon band
goerend 2200 stall converter
custom built 47re valve body high pressure valve body
Deep pan
Billet Flex Plate
Trans refresh this past winter has had 15 hooks sence then
4500.00

billet wheel 2.6 turbo with 1/8 protrution 475 wheel with race cover .90 ex with the big .96 ex wheel has 20 hooks on it 1500.00

fass 150 150 with wiring harness and all the fitings will need new lines though 300.00

dr proformance pressure box 250.00

7 by 18 24v pump complete injectors 500.00 no cores needed
 
Yes they did Jared and there going out TM with the pumps to Danny if u want them pay me and Danny will give them to u if not Danny said he will take them
 
Hey ready to send the money for the injectors, both sets of nozzles, the head, and the TST. Just waitin to hear back from you. Thanks Zach

Sent from my SPH-M910 using Tapatalk
 
You must log in or register to reply here.
Top