I need some help with getting my cruise to act normal.
I set the cruise going down the highway, lets say at 70mph. Normally this is around 10psi of boost.
Now what the truck does is basically lightly throttle up and down. The mph stays the same, but the boost is where I can notice it.
With power adders like the Smarty and TST combo I have it will go down to 5 psi and up to 15 psi.... So it hits 15psi, and boom.. .5psi... and keeps on doing that.
It's pretty darn annoying to say the least!
I put a WD40 straw in the vac line feeding the turbo and it helped, but didn't fix it.
I checked the APPS sensor today with a scanner and it read correctly, (0% at idle and 100% at WOT). I think I will test it with a multimeter though to make sure it's correct in that aspect.
Otherwise, I'm not sure what else to do?? I know I can't be the only guy that has had this issue!?
I set the cruise going down the highway, lets say at 70mph. Normally this is around 10psi of boost.
Now what the truck does is basically lightly throttle up and down. The mph stays the same, but the boost is where I can notice it.
With power adders like the Smarty and TST combo I have it will go down to 5 psi and up to 15 psi.... So it hits 15psi, and boom.. .5psi... and keeps on doing that.
It's pretty darn annoying to say the least!
I put a WD40 straw in the vac line feeding the turbo and it helped, but didn't fix it.
I checked the APPS sensor today with a scanner and it read correctly, (0% at idle and 100% at WOT). I think I will test it with a multimeter though to make sure it's correct in that aspect.
Otherwise, I'm not sure what else to do?? I know I can't be the only guy that has had this issue!?