cummins performance parts

H

heins

New member
Joined
Nov 8, 2011
Messages
131
cleaning out the shop and getting rid of the stuff i dont need.

first off i got a super ht4c holset turbo. 88mm compressor and 29cm (~1.15A/R). it has less than 100 miles on it so it has no shaft play at all. $1000obo+shipping

Also have a Forced Inductions s480/92 1.10 a/r with both t4 and t6 exhaust housings. This turbo is set up for quick spool and has FI's low drive pressure 92mm turbine wheel. looking to get $1100obo+shipping for it with both housings. less than 3k miles. i ran as a single with the t4 housing but is also a great bottom turbo for twins with the t6 housing.

ats 3-piece manifold t-3 flange for a 24 valve. unsure of the miles on it but its in good shape and has no cracks.. $300obo+shipping

edge 275rv injectors for 24valve. unsure milege but worked good when they were in the truck. $300obo+shipping

edge juice with attuide chip for a 98.5-00 cummins. does not have the hot unlock code. will also include the pillar for the monitor. $400obo+shipping.

i can send picture via email or text message. if you have any question feel free to ask either on here or at 319-795-7093 text message prefered. thanks
 
More turbos mostly. I've got an a3k that has the .85 housing and the housing and hotpipe for a3/a5 twins. I'm interested in the 480 so if I did that I'll have a 475 73/84 with a 1.10t6, 1.10 t4 and .90t4 to trade as well.

Sent from my SCH-I535 using Xparent Blue Tapatalk 2
 
No prob, I'm in no rush.

Sent from my SCH-I535 using Xparent Blue Tapatalk 2
 
You must log in or register to reply here.
Top