willyb
.........
- Joined
- Apr 11, 2007
- Messages
- 581
I have a front driveshaft with a 1410 u-joint in the front and the c/v joint eliminated (it will need u-joints replaced). It will also come with the D70 yoke that will bolt on the D60. When this shaft was made it was all new; slip joint, flange; and tube; nothing was used off of the old driveshaft.
I had it made for my 2000, so it is the exact size of the stock shaft, but with the yoke being a little bit bigger I don't believe there is enough travel for it to work with a 47re and 241 dld. (reason being it needs new joints and the truck having a fairly new broken trans mount)
I would like $200 plus shipping
Thanks -Will..
I had it made for my 2000, so it is the exact size of the stock shaft, but with the yoke being a little bit bigger I don't believe there is enough travel for it to work with a 47re and 241 dld. (reason being it needs new joints and the truck having a fairly new broken trans mount)
I would like $200 plus shipping
Thanks -Will..