dieseltracks
lost
- Joined
- Nov 11, 2007
- Messages
- 710
Dual wheel drum brake D80...I purchased a used spool and then bought a new set of Yukon 4.11 gears and a new Motive Gear master install kit and had them installed in the housing.
The axle tubes have also been welded.
Everything in the center section is brand new except the spool...which was used but looked brand new.
It does need new brake shoes and hardware and possibly new drums. It also needs axles seals.
I was builidng it to put in my 2.5 truck that I'm working on but decided to go a different direction. This rearend has not been mounted to a truck since the work was done.
I paid $450 for the rearend and $880 for the parts I had installed.
Asking $1000 or partial trade for a SRW D80 w/LS and 4.10's.
Located close to Kokomo, IN.
The axle tubes have also been welded.
Everything in the center section is brand new except the spool...which was used but looked brand new.
It does need new brake shoes and hardware and possibly new drums. It also needs axles seals.
I was builidng it to put in my 2.5 truck that I'm working on but decided to go a different direction. This rearend has not been mounted to a truck since the work was done.
I paid $450 for the rearend and $880 for the parts I had installed.
Asking $1000 or partial trade for a SRW D80 w/LS and 4.10's.
Located close to Kokomo, IN.