D80 ??

[HIGH TECH RAM]

Where can I get a 1480 Slip yoke and pinion Yoke? I'm goin to a piece driveshaft.

Thanx

 

[BigYellowIron]

the dana 80 yoke you can get from Randy's ring and pinion. the slip Haisley sells!!!

 

[therealpuller]

Where can I get a 1480 Slip yoke and pinion Yoke? I'm goin to a piece driveshaft.

Thanx

JT's has rear yoke.

 

[Sledpuller]

Greensburgh Machine, PA 724 837 8233

Greensburg Machine Driveline, LLC...Your Full-Line Source for Driveshafts

 

[BigB82789]

Haisly for the slip yoke. JT's for the pinion yoke.

 

[HIGH TECH RAM]

Thanx... Who uses a a single shaft on a ECLB? Have any luck with them?

 

[BigB82789]

Did you break or just lookin to upgrade?

 

[Up N Smoke]

i think u can get it at john cookson transmission in dover ohio

 

[HIGH TECH RAM]

Did you break or just lookin to upgrade?

both!

 

[BigB82789]

Guess hanging weight didn't help ur cause for not breaking..lol

 

[HIGH TECH RAM]

It happened first hook when I didnt hang any weight.

 

[BigB82789]

Ah, gotcha.

 

[brushpuller]

Anyone used the 1480 d-80 yokes on ebay...cheap enough!!! Im looking into making some 1480 slip yokes...would there be any interest???

 

[BigB82789]

Don't get the cheap Chinese knock off's.

 

[Persingerpulling]

Greensburgh Machine, PA 724 837 8233

Greensburg Machine Driveline, LLC...Your Full-Line Source for Driveshafts

X2, great place to deal with.

 

[zstroken]

Don't get the cheap Chinese knock off's.

When I checked ont he yokes on ebay, I was told they were a genuine Dana part.

 

[smokin1997]

Thanx... Who uses a a single shaft on a ECLB? Have any luck with them?

mine is 76" center to center. 4" tubing is what the guy made it with. its worked good for me.

 

[joelc79]

Sam Winer Motors - Electric Winches, Mechanical Winches, Hydraulic Winches or Adelman Companies
Sam Winer motors is in Akron area and Adelmans is in Canton They both will have it, all spicer/dana parts. They are a complete driveshaft service as well.
How about a price on the 12V rods chris

 

[HIGH TECH RAM]

mine is 76" center to center. 4" tubing is what the guy made it with. its worked good for me.

What was the wall thickness? I dont want it to twist on me...

Sam Winer Motors - Electric Winches, Mechanical Winches, Hydraulic Winches or Adelman Companies
Sam Winer motors is in Akron area and Adelmans is in Canton They both will have it, all spicer/dana parts. They are a complete driveshaft service as well.
How about a price on the 12V rods chris

Thanx for the info.
Joel, I'm gonna use the rods. I'll Have another set of rods thow so keep in touch

 

[smokin1997]

What was the wall thickness? I dont want it to twist on me...



it was 1/8th inch wall i believe