Dana 80 and some other stuff!!

C

CR785

New member
Joined
Jan 19, 2008
Messages
302
I have a single wheel d80 with upgraded yukon 37 spline axles with 37 slpine carrier,"welded" like a spool, with 4.10 gears. Has 10 hooks on everthing but the housing.

3-stock nv4500 input shafts
1-stock 12v air box
set of brand new front springs for 3/4
1-steering column gauge pod for 3rd gen
12v fan
12v crank dampner
1 set factory leaf spring blocks
1set factory leaf springs
1-241 dhd t-case
lots of nv4500 parts.
stock rods and pistons
1-stock cam
1- front gear housing cover
1-stock tappet cover
1-set stock push rods
1-set stock tappets.

Im sure i am leaving some stuff out, if you dont see what you need or want ask me. Everything is make an offer. The axle and t-case would be expensive to ship but if you want them shipped, you will have to take care of it. Thanks for looking, no resonable offer refused.
 
CR785 said:
yes, sorry, it is a dodge d80.
Click to expand...


Just curious about the 37 spline yukons, last time I talked with Randies, the 37 splines were not available for the dodge d80. The axle shafts are different length than the fords.
 
zstroken said:
Just curious about the 37 spline yukons, last time I talked with Randies, the 37 splines were not available for the dodge d80. The axle shafts are different length than the fords.
Click to expand...

I dont have a dor sure answer for you about the lenghths, i got them through brad at schied, i know i had to wait a good bit to get the axles.
 
pending pament on the cover, everything else is still available, make offers people this stuff needs new homes.
 
You must log in or register to reply here.
Back
Top