DD Clutch, Turbo's for sale

Signature600

Signature600

THA MAN!
Joined
Aug 5, 2006
Messages
12,031
South Bend 3250 Solid Hub Clutch, 15K on rebuild/update. Has lever style diaphragm, bronze inserts. Drove fine when pulled, thought I had throwout bearing problems, ended up being thrust bearing in engine:D

$900 shipped, or make me a reasonable offer



HTT 64/71/13SS for 3rd Gen...HX40 outlet I believe, compressor has very, very minor damage...runs fine, and I've seen a lot worse. Have a downpipe for it, but it's for a 2nd gen.

$1000 shipped with downpipe, $900 if you don't need the downpipe!



Garrett, Stage III ball bearing turbo...63.5mm intake wheel, .99 A/R exhaust housing. Water cooled. Ran on my 12v for 500 miles, too much fuel for it (also too much fuel for 62/S480 twins;)) Spools good, runs great, good 500-550hp charger with the right combo.





Garrett, Stage II ball bearing turbo...60mm intake wheel, .89 A/R exhaust housing. Water cooled. Ran on my Friend's 02 HO with Smarty and Mach 4's...made a solid 425hp on a couple dyno's, never went over 1400* even towing HEAVY at that level...spools VERY good, and cools OK.

$1000 just the charger


I have one 2nd gen parts kit to go with one of the Garrett chargers...if you want the stage II, or III with the kit, add $250 and it'll bolt right on;)


Pics available on request...just easier to email them than post them on my webpage


PM, email at c_mayer@mayerfarmequipment.com, or call at 740-505-0240 anytime.

Thanks,
Chris
 
Sorry, the HTT 64/71/13SS is a 3rd Gen outlet flange on the exhaust...at least I think...it's bigger than the HX40's I have!


So I don't have a downpipe for it.
Chris
 
What do you mean by minor damage? I am interested in the charger depending on what issues come with it!
 
sniper said:
What do you mean by minor damage? I am interested in the charger depending on what issues come with it!
Click to expand...

It's got some small nicks in the leading edge of the compressor blade...not sure what it might have sucked up. Doesn't look like it just sucked in dirt...I've seen chargers that were run with no filter, doesn't look like that.

I bought it like that, ran it, and everything is fine.
Chris
 
A Vp-44 with some miles on it, no codes when pulled! couple of Amps! name somethin you need and ill see if i got it

Edit: I guess i should ask first which input is it?
 
Trade the stage 3 and install kit for a hx40 ? and cash of course ?

Nice deals bud!
 
Sig600 inbox is full.

Can you send some pics of the Garrett STG3? How many miles, yes my hx40 is the 6 blade.

Thanks
 
Sale Pending on HTT 64/71/13SS


Stage 3 Garret Sold!



Clutch and Stage II Garrett, and 2ng Gen Install kit is still available!

Chris
 
You must log in or register to reply here.
Back
Top