Diablo Power Puck for 2002 Cummins

wideopen

Slum Lord
Joined
Apr 3, 2006
Messages
20,816
Less than 2 months old, was on the truck for 3 weeks.

$140 Shipped.


50 HP and 150 FT/LB of Torque (1999-2002)

PowerPuck installs in nine easy steps and in less than an 10 minutes, no wires to cut, no seals will be broken and no feeding cables through the firewall

Factory spec interlock connectors and a completely sealed wiring harness

PowerPuck is designed to put no additional strain on the Diesel injection pump. The rotary VP44 injection pump in the 24v Cummins has a preset electronic limit to the amount of fuel it will deliver. Since the PowerPuck is plugged in between the ECU and injection pump, the PowerPuck is programmed to never exceed that limit



Diablosport.com said:
The Power Puck remaps the fuel delivery of the diesel injection pump and advances the injection-timing curve.

The PowerPuck software works on changing the injection quantities an advancing the ignition curve, it will not alter the load pressure directly. The load pressure is increased due to the increase in fuel volume delivery. This in itself makes for an extremely reliable tuning device with one sole purpose, POWER!

PowerPuck equipped vehicles will notice significant improvements in drivability, whether it is in town, where speeds constantly change, or on the highway passing slower vehicles.

Power Puck increase's power through the entire RPM range, at low RPM it will yield better throttle response; and help maintain speeds on inclines or when towing. The mid-to-upper power increase is extremely useful on the highway to maneuver through heavy traffic situations.

Stackable with Predator for a variety of performance levels
 
bump.gif
 
Hold please, my nieghbor may want to jump on this one. I'll contact him. 2001 copy of my 2002 truck.

P.S. I like your "bump" sign! :D
 
Depends, does the puck have the old connector or the new one?
 
It's set up for a 2002 Truck ..But as Daniel said you can get the Adaptor.
 
Back
Top