L lager69 New member Joined Dec 3, 2009 Messages 14 Dec 3, 2014 #1 Put a dana80 in now drive shaft don't fit any ideas
L lager69 New member Joined Dec 3, 2009 Messages 14 Dec 3, 2014 #3 That what I thought . do u know how much
yjay New member Joined Jun 21, 2014 Messages 176 Dec 3, 2014 #4 Measure from the face of the transfer case yoke to the face of the rear dif yoke at ride height. Then have a driveline shop cut it down for you. Should only be a hundred bucks or so.
Measure from the face of the transfer case yoke to the face of the rear dif yoke at ride height. Then have a driveline shop cut it down for you. Should only be a hundred bucks or so.