Dodge engine parts for sale

zstroken

zstroken

For $$$ your name here
Joined
Sep 27, 2006
Messages
23,151
97 block, needs hone, believe it is stock bore, so go .020 and be safe $350
97 crank, needs cleanup, has surface rust, needs cleaned up $125
97 rods, appear to be in good shape. $125

These were bought for a project and I am going a different route.


Can bring to scheids.

$500 for all.

I will try to get some pictures in a few days.
 
Dan, is the block one with 14mm mains? I'm not interested in it, but a 14mm main block is worth more than $350.
 
SmokinCummins said:
Dan, is the block one with 14mm mains? I'm not interested in it, but a 14mm main block is worth more than $350.
Click to expand...

Thanks for the heads up. I am pretty sure it is a 14mm main block. I think I recall seeing if head studs would fit in there, and they dropped right down in. I guess I will hold onto this, if I can't get $350 out of it.
 
Bump, loaded the rods and crank up for a guy to look at in Terre Haute. Never heard from him.
 
Bump,
I also have another 97 for sale. Runs fine has some blowby.

It is minus a cam. Basically block, pistons, rods, crank. This is the one out of my puller, so it has some leaks, etc. 125K stock miles, 2000 miles not so stock! I have the stock head available for it also. Head was taken off when motor was still stock.

$1000 for block, rotating assembly, and head.
 
I have seen all the parts in person and he has priced them to sell!
Brandon
 
Bump on parts.

2 blocks, both are 97's one has the chip one is fine.
3 cranks one 97 needs cleaned, one 99 with tone ring, and one 97 still in the truck
1 set of 12 V rods still in the truck.
 
You must log in or register to reply here.
Back
Top