GOT-Torque
is
- Joined
- Jul 2, 2007
- Messages
- 5,284
Rear driveshaft for 2nd gen Dodge ECLB truck with 158" wheelbase running 241DHD and D80 rearend (out of my puller). 1480 at front and rear. Should fit any legal wheelbase configuration (shorten if necessary). $350 OBO
Ford D60 spindle/hub conversion kit parts to work on a Dodge D60 (2 hubs,2 spindles, and spindle nut assembly, includes rotors) You would need stub shafts and lockouts or drive flanges. $300 OBO
Discussed here:
D60 outer stub shaft upgrade? - Competition Diesel.Com - Bringing The BEST Together
5" hoodstack piping with reducer to 4" at exit. It is ceramic coated black but changed to a S400 style flange and had to add some ipe in the middle, those two areas are not coated. (Was on a dodge with a steed speed T6 manifold and S400) $125 plus shipping
Custom aluminum Breather tank with stainless braided lines and AN fittings. Mounts to firewall and connects to billet tappet cover. Tank is filled with SS mesh, works excellent on a pulling truck. $175 plus shipping
4" hoodstack piping, wrapped. (was on a dodge with a pdi T6 manifold and S400 with the smaller exhaust housing) $125 plus shipping
Dodge chrome center caps $50 per pair.
3 large bilge pumps used for air to water intercooler setup on puller. 3500 or 4500 GPH, will verify. Used one season. $225 plus shipping
6.7 oil pan, had a very small dent in the front bottom edge that has been popped back out. $90 plus shipping.
Misc. parts for sale:
DT Profab Tracbar bracket for 4.5 to 7" lift (brand new) $60
Pair of Cepek Giant Pullers 34x18.0-15 (6 ply, used, some threads showing) double cuts $300
HE341 (minus compressor housing), will need disassembled and cleaned $60
12V cam gear $80 (have a few available)
Set of 6 factory 12V valve covers $80
Set of factory 12V rocker arms/stands $100
Custom SS intake that routes up and over the valve cover towards turbo with 1/8" bungs for water injection (was on a 24V) $100
If pics are needed, shoot me a text at 402-801-2319.
Ford D60 spindle/hub conversion kit parts to work on a Dodge D60 (2 hubs,2 spindles, and spindle nut assembly, includes rotors) You would need stub shafts and lockouts or drive flanges. $300 OBO
Discussed here:
D60 outer stub shaft upgrade? - Competition Diesel.Com - Bringing The BEST Together
5" hoodstack piping with reducer to 4" at exit. It is ceramic coated black but changed to a S400 style flange and had to add some ipe in the middle, those two areas are not coated. (Was on a dodge with a steed speed T6 manifold and S400) $125 plus shipping
Custom aluminum Breather tank with stainless braided lines and AN fittings. Mounts to firewall and connects to billet tappet cover. Tank is filled with SS mesh, works excellent on a pulling truck. $175 plus shipping
4" hoodstack piping, wrapped. (was on a dodge with a pdi T6 manifold and S400 with the smaller exhaust housing) $125 plus shipping
Dodge chrome center caps $50 per pair.
3 large bilge pumps used for air to water intercooler setup on puller. 3500 or 4500 GPH, will verify. Used one season. $225 plus shipping
6.7 oil pan, had a very small dent in the front bottom edge that has been popped back out. $90 plus shipping.
Misc. parts for sale:
DT Profab Tracbar bracket for 4.5 to 7" lift (brand new) $60
Pair of Cepek Giant Pullers 34x18.0-15 (6 ply, used, some threads showing) double cuts $300
HE341 (minus compressor housing), will need disassembled and cleaned $60
12V cam gear $80 (have a few available)
Set of 6 factory 12V valve covers $80
Set of factory 12V rocker arms/stands $100
Custom SS intake that routes up and over the valve cover towards turbo with 1/8" bungs for water injection (was on a 24V) $100
If pics are needed, shoot me a text at 402-801-2319.