dtt shift kit

blacksmoke20

New member
Joined
Mar 22, 2011
Messages
34
i have a 99 im putting a dtt shift kit in whats the holes for they want u to drill one is 0.90 thou and the other is 0.53 thou i have everything else figured out except for the screw to set line pressure up dtts instructions are very vague
 
For firmer lockup and maybe for more line pressure for reverse bit not sure on that. What is your ? On screw for line pressure?
 
well the instructions arent very clear it says this notice how far out the plate that holds the pressure regulator spring is from flush. you need to back out the screw all the way out so that the plate sits flush and against the outer housing. once this is done turn the scres back in 4 turns this will get the pressure very close to the desired 80psi at idle thanks for the help btw iowdiesel
 
i could do this kit no problem dtt instructions are horrible i heard they were but dang come on lol
 
Back
Top