dual cp-3 and top radiator hose

[SMOKED]

i need a top radiator hose that works, doesnt have to be pretty, has to work, i have evil twin cp-3 kit and the hose randomly touches the belt and is rubbing a hole in the hose :thankyou2:

 

[rams-n-hogs]

i need a top radiator hose that works, doesnt have to be pretty, has to work, i have evil twin cp-3 kit and the hose randomly touches the belt and is rubbing a hole in the hose :thankyou2:

I used the stock hose. I had to cut it a little shorter on the thermostat end, and a little longer on the radiator end, to get it to fit right. It took a little tweaking, but I made it work with about 1/4 inch clearance. If the pipe isn't right, I have an extra you can have.

 

[trucken]

Go to muffler shop, use hard pipe instead and their pipe bender. You can mig a mount brace too if you want.

 

[trucken]

ATS and PPE have hoses to sell made for DUal CP3's. It reroutes hose (part hard part rubber) over vavle cover.