Dyno results...need a bit of advice.

U

unfinished business

New member
Joined
Mar 29, 2008
Messages
968
Well I dyno'd the truck in my sig and I am pretty happy with what I got. It put down 471 rwhp and 906rwtq. I should have blocked my wastegate becuase it only made about 40-41 psi, but the egts only hit 1250 or so. The RP was around 18-20k[redface].
Just like everyone else, I am now looking for more. I will hopefully be doing Inj, Springs, Single CP3 and studs this winter or next spring, but till then I am looking for a good stack. I am thinking about a DR.P, MP-8 or ??? to go with my smarty.

So I am looking for some advice and comments about the dyno.

Thanks,

Paul
 
i have the mp-8 on mine and made 480 with everything else stock exect the smarty thats including the exhaust and intake being stock
 
I would go with an mp-8 or an ez ... I have heard that the DR P box cruises at 26K!!!!! Thats quite a bit to just "cruise" at I would think, also it looks like you are running just plain revo? Why not upgrade to tnt? That would be a pretty good boost in itself... Unless you have a boost fooler, I would go with the MP-8 since it has a built in boost fooler, although sometimes the MP-8 doesnt boost fool I have heard
 
nemesis said:
I would go with an mp-8 or an ez ... I have heard that the DR P box cruises at 26K!!!!! Thats quite a bit to just "cruise" at I would think, also it looks like you are running just plain revo? Why not upgrade to tnt? That would be a pretty good boost in itself... Unless you have a boost fooler, I would go with the MP-8 since it has a built in boost fooler, although sometimes the MP-8 doesnt boost fool I have heard
Click to expand...

I updated my sig. I was running the tnt on lvl 7 and I hav a quad boost fooler. I can remove it if need be.
 
the egts run around 1600 full throttle...if you get the mp-8 you can get rid of the quad boost fooler
 
My brother [Brian Lent] made his best numbers on sw3 Smarty [554hp] with stock CP3. He had 100hp injectors & 62/71/13ss. You may find that you get better numbers on lower settings with stock cp3.
 
I will def give that a shot. I did findout that I am having an issue with my wastegate which will hopefully soon be solved. I will then redyno :rockwoot:
 
You must log in or register to reply here.
Back
Top