I just bought a 1995 reg cab 5 speed with the 12 valve. In the hopes to swap a 1991 reg cab body onto. My question to you all is what does the computer on the 95 control. I know its not the engine or trans just tryin to get everything all figured out.
ECM questions
- Thread starter tskibyak
- Start date
cumminspride
New member
- Joined
- Jun 3, 2007
- Messages
- 65
The only thing that that will require should be the cam sensor communicating with the ecm to allow the alternator to charge. This can be avoided by going to a 89-91 wiring alternator with a firwall mounted voltage regulator. I think that's about all you should have to worry about.