EDP / Precision 3.0 / 2.8 / 2.6 Turbos released

EDP

EDP

Comp D Sponsor
Joined
Jul 17, 2007
Messages
511
Empire Diesel is proud to announce the release of the track provin Precision competition billet series turbo line up.

Billet custom intake wheels built per application.
Great spool up with near Zero Lag
Based off GT42 Platform for easy install.
T4
2.6 / 2.8 / 3.0 with 1/4 MWE. Tested all last season with phenomenal results on many different applications and setups.
Serious CFM numbers.
 

Attachments

  • Precision2.8.jpg
    Precision2.8.jpg
    37.3 KB · Views: 376
So is it just the compressor wheel that is built to your spec or are you offering different turbine wheel / housing options than the standard GT42?
 
Also curious about exhuast options for 2.6 or 2.8. Even a ball park figure if ya can?
 
I talked with the engineer from precision at the pri show, pretty sharp guy
 
Trusted said:
So is it just the compressor wheel that is built to your spec or are you offering different turbine wheel / housing options than the standard GT42?
Click to expand...
All custom built per application. Application decides on what wheels are installed some have been using stock turbine wheels others are custom made wheels.

NEsmoker said:
Also curious about exhuast options for 2.6 or 2.8. Even a ball park figure if ya can?
Click to expand...

Many different exhaust options once again speced to your setup.

We have seen dyno number gains from 32-88hp compared to out of the box GT4202R in a 2.8 setup.
 
These turbos just did some major feet these past two weekends. Pulling in classes against twins and other larger framed turbos and held there own not to mention won a couple as well!!!
 
Can you build them using the GT42 housings instead of your own??
Bryan
 
I imagine all,heard there is a line to get a charger from precision right now.
 
Anymore info on these turbos? Anyone using these turbos willing to give some feed back?
 
I talked to one of the guys we sponsor at SDX. He said that Chad had a 3.0 Duramax pulling and it was crazy. He was very impressed. So, I imagen they have a few of these out there.
 
we do some testing for precision turbo and there turbos are the best we can find. It would be safe to say they have the best all around turbos out there.
 
Trusted said:
I talked to one of the guys we sponsor at SDX. He said that Chad had a 3.0 Duramax pulling and it was crazy. He was very impressed. So, I imagen they have a few of these out there.
Click to expand...

YouTube - GMC 3 0

That was a 2.6 truck single cp3 and only its second pass down the track. Lots of tunning to wash out. We will be hooking it again tomm night in a 3.2 twin class. I will try and get some video.
 
Due to the high demand of these chargers time frame on getting your hands on one is getting pushed back farther. Now is the time to order for next season.
 
Whats the average price on these? 2.6 mostly what I'm interested in. Thanks.
 
depending on setup you can be between $2000-$3000 for a 2.6
 
You must log in or register to reply here.
Back
Top