EEP Billet Cam

[JerrodGlover]

Cam from EEP 12v Billet steel ran for last 3 seasons requires .75 and .90 valve cuts in pistons.

Looks good ran with zddp in oil.

Price $600 shipped.

 

[The Cummin Goat]

Cam from EEP 12v Billet steel ran for last 3 seasons requires .75 and .90 valve cuts in pistons.

Looks good ran with zddp in oil.

Price $600 shipped.

That's the deepest valve relief I've ever heard of Jared. Almost an 1" of clearance. That one aggressive cam. I think you might mean .075 and .09 cuts.

Here's a bump for ya.

 

[JerrodGlover]

Oops yeah I forgot a few zeros in there, thanks Aaron.

 

[JerrodGlover]

bump

 

[JerrodGlover]

Make offer.

 

[SMOKIN93]

Why you sellin?

 

[JerrodGlover]

Went a different route with the new motor.

 

[JerrodGlover]

Bump

 

[JerrodGlover]

Offers?

 

[JerrodGlover]

Still in my way someone must need it.

 

[JerrodGlover]

Someone asked if it was required to run bearings with this cam. I ran it for 2 years with no additional bearings in the block. There is no noticeable wear on the surfaces.

 

[JerrodGlover]

Can bring to Muncie this weekend with me.

 

[Nickscott89]

Can I get your number?

 

[JerrodGlover]

616-299-8309

 

[BlackCloudDodge]

still for sale?

 

[diesel444]

cam

Is this cam for pulling only or is it drag, or street thanks

 

[JerrodGlover]

It was used for sled pulling, I have it in the truck but it is always for sale.