jjmachine New member Joined May 3, 2008 Messages 380 May 28, 2009 #1 this is a cam that requires no valve reliefs and is a complete drop in. 700 shipped no core needed
full pull Sales&Support Valair Inc Joined Jan 12, 2009 Messages 1,683 May 29, 2009 #3 thats seems pretty high.
jjmachine New member Joined May 3, 2008 Messages 380 May 30, 2009 #4 It was well over 900 when we purchased and it was used for a week with no pulls or drags on it. Just an aggressive cam that is for pulling but it allows you to use your stock components. So it cost us a little more to have a custom one ground.
It was well over 900 when we purchased and it was used for a week with no pulls or drags on it. Just an aggressive cam that is for pulling but it allows you to use your stock components. So it cost us a little more to have a custom one ground.
Dodgentwo New member Joined Sep 16, 2007 Messages 1,701 May 31, 2009 #7 would it work in a 12V? Would just need a aux. lift pump wouldnt I?
jjmachine New member Joined May 3, 2008 Messages 380 May 31, 2009 #8 it is cast and to be honest i have no idea if it would work on a 12 valve or not
