Electronics or Injectors

2Tone12V

New member
Joined
Jun 25, 2007
Messages
9,336
Got a guy with a bone stock truck. If you were only going to do one upgrade what would you do. A small set of 100 horse injectors or electronics like an edge juice w/ attitude?
 
I like the 100HP injectors. Injectors are smoother power. Put some 100HP injectors in it and see if you can find an edge EZ floating around.
 
Timing does wonders. Small injectors and ez is smooth nice power!
 
Either a bigger box like the Juice, Adrenaline, or Comp if it has gauges.
Or a small box like the EZ and some small sticks.
 
Stock sticks, TS MVP, if he is still not happy bump up the injectors to RV275's. EGT's should be in check and the power will be niiiiice.
 
My first mod on my 02 was 100 stix everything else stock, ran great 3 months later added quad Adrinaline and wow
 
When I first got my truck I was very happy with just the Edge Juice with Attitude, I liked having the gauges as a package. The transmission on the other hand didn't like it as much after adding 90 HP injectors. LOL
 
I'd say adding a box. Especially one that has gauges as part of the package, if the truck doesn't already have them. You get the best of both worlds. More power and the ability to monitor your systems.
 
I think you guys missed it. Electronics OR Injectors LOL
He will be getting a pump from us as well. Family member to an employee.
 
I think you guys missed it. Electronics OR Injectors LOL
He will be getting a pump from us as well. Family member to an employee.

You already bought the new baby a truck?

I would say injectors.
 
Good job, start a thread instead of asking the guy across the hall that sold the stuff for 10yrs lol.

Juice with attitude. If he plans on towing and is in it for the performance.

Edge EZ and a fuel pressure gauge if he's more concerned with fuel mileage and ROI.

Most ideal set up for towing and fuel mileage. EZ or MVP box and 50-75hp injectors, EGT and Fuel pressure gauge.
 
Last edited:
I'd do a juice with attitude, he gains around. 100hp and can turn it down if he needs to tow heavy, and he has all the gauges he needs already
 
Do you think I asked because I had no idea or because I wanted to see what others opinions were? I think I've wrenched on a few trucks to have a pretty good idea. What a douche. LOL Next time I know to go across the hall and ask the 10 years sales desk guy. LOOK OUT FOLKS!!! WE HAVE A CUMMINS FORUM EXPERT ON OUR HANDS!! LOL
 
Last edited:
lol dick.

It has nothing to do with being a Cummins expert jerk it has to do with knowing the parts. I'll end there cause i still need you to help me this weekend :)
 
Last edited:
Back
Top